Simrad ES80 Wideband fish finding echo sounder

Cleaning the echo sounder transducer

The transducer normally needs little attention. However, the transducer face must be inspected and cleaned when docking.

Procedure

  1. Place the vessel in dry dock.
  2. Perform a thorough check of the transducer. If necessary, clean the transducer.

Refer to your user manual for a more detailed procedure.


Important information

Do not paint the transducer with traditional hull plating paint. Use only the correct type of approved paint specified by Simrad.

Do not use metal tools on the transducer.

Do not use a high pressure washer on the transducer.



Copyright Kongsberg Maritime AS 2007

Home