Simrad SH80 Fish finding sonar

Simrad SH80 Fish Finding Sonar

Hull Unit

The Simrad SH80 sonar is provided with a hull unit designed to lower the transducer 1 m down.

Drawings:

Standard SH80 hull unit

The SH80 Hull Unit is designed to be lower the transducer 1.0 meters below the ship's hull. The transducer can also be lowered to any selectable middle position. The cylindrical transducer array with 480 elements allows the sonar beam to give full 360° coverage of the water volume down to -60°. The sensor for the electronic stabilization of the sonar beams is housed in the Motor Control Unit (H).

Main parts identification


(A) = Upper limit switch S304

(B) = Transducer cable

(C) = Transducer shaft

(D) = Lower limit switch S305

(E) = Pressure release plug (on rear side)

(F) = Air bleeding plug

(G) = Hoist motor

(H) = Motor Control Unit

(I) = Gantry

(J) = Mounting flange

(K) = Installation trunk

(L) = Transducer

Hull unit, outline dimensions


Note: This drawing is available for download in PDF and DWG formats.

Standard SH80 hull unit, outline dimensions

Mounting trunk, outline dimensions


Note: This drawing is available for download in PDF and DWG formats.

Standard SH80 mounting trunk, outline dimensions


Copyright Kongsberg Maritime AS 2007

Home