Simrad SU90 Fish finding sonar

Cleaning the sonar transducer

The transducer normally needs little attention. However, the transducer face must be inspected and cleaned when docking.

Procedure

  1. Place the vessel in dry dock.
  2. Ensure that the distance between the vessel hull and the bottom of the dry dock is sufficient to lower the transducer.
  3. Lower the transducer.
  4. Perform a thorough check of the transducer. If necessary, clean the transducer.
  5. Once inspection and cleaning has been done, hoist the transducer up into the trunk.

Refer to your user manual for a more detailed procedure.


Important information

Do not paint the transducer with traditional hull plating paint. Use only the correct type of approved paint specified by Simrad.

Do not use metal tools on the transducer.

Do not use a high pressure washer on the transducer.



Copyright Kongsberg Maritime AS 2007

Home