Simrad ES38-7

Download data sheet

The Simrad ES38-7 is a wide band split beam transducer designed for fishery and fishery research applications.

The beamwidth is 7 degrees at the nominal operational frequency 38 kHz. The transducer is designed with four separate sectors, and includes a sensor to measure the sea temperature.

Simrad ES38-7

The transducer is normally mounted flush with the hull plating or the bottom of a blister. It is provided with an installation flange, and by means of a clamping ring it is secured to a mounting ring welded into the hull plating or the bottom of a blister. The clamping ring is provided with the transducer, and already fitted. The transducer can also be flush mounted at the bottom of a drop keel.

The transducer cable penetrates the hull using a stuffing tube and a cable gland.

Technical specifications

Download the Simrad ES38-7 Data sheet.

Order information

To order the transducer, or any of the optional items provided with it, contact your local dealer. If you do not have a regular dealer, a list of all our distributors and dealers can be found on this website. Your dealer will also be able to help you with a detailed quotation including price and delivery information.

ProductOrder numberIn the box
Simrad ES38-7 321842 Transducer
Stuffing tube
Cable gland
Mounting hardware

The transducer is provided with a dedicated clamping ring. This ring is already fitted to the transducer flange.

Optional items

These optional items are available for the installation. You can manufacture these items yourself, or order them from us. The items are not included with the transducer delivery, and must be ordered separately.

The order number for the transducer cable is included in case the cable fitted to the transducer is too short.

ProductOrder numberIn the box
Mounting ring 499-074076 Mounting ring
Transducer cable 382189 Transducer cable


How to access the DWG files

Whenever available, each drawing is provided on both PDF and DWG formats. When applicable, the DWG version of the drawing is included in the PDF file as an attachment.

  1. Open the PDF file in the normal manner.
  2. Observe the "Attachment" icon in the lower left corner.
  3. Click the icon to open the list of attachments.
  4. Click on the DWG file provided, and select required action on the menu above the list.

  1. Attachement icon
  2. Menu: Open or save the attachment file

The following 38 kHz transducers are available.

Single beam transducers

Split-beam transducers

Dual frequency single beam transducers

Dual frequency split beam transducers


Echo sounders

Copyright ©2019 Kongsberg Maritime AS - All rights reserved. Terms of use | Contact information | Website feedback