Simrad ES38-18/200-18C

Download data sheet

The Simrad ES38-18/200-18C is a two-in-one combi transducer. It is designed for fishery and fishery research applications.

The transducer contains a 38 kHz split beam transducer as well as a 200 kHz single beam transducer. Both offer 18 degrees beamwidth at their nominal operational frequencies. The split beam transducer is designed with three separate sectors.

Simrad ES38-18/200-18C

The transducer is streamlined, and designed to be mounted under the hull. Flush mounting is not recommended.

A fairing must be designed to fit between the top of the transducer surface and the hull. The fairing shall offer the necessary inclination angle, and provide space for the cable service loop.

The fairing must cover the entire top surface of the transducer house. Supporting only at each end of the transducer, may cause damage to the transducer if subjected to slamming.

The transducer housing is provided with two holes for mounting bolts. These shall penetrate the transducer and fasten it to the fairing.

The transducer cable penetrates the hull using a stuffing tube and a cable gland.

Technical specifications

Download the Simrad ES38-18/200-18C data sheet.

Order information

To order the transducer, or any of the optional items provided with it, contact your local dealer. If you do not have a regular dealer, a list of all our distributors and dealers can be found on this website. Your dealer will also be able to help you with a detailed quotation including price and delivery information.


ProductOrder numberIn the box
Simrad ES38-18/200-18C 398445 Transducer with open ended cable
Stuffing tube
Cable gland
Documents
Simrad ES38-18/200-18C 430171 Transducer with 8-pin connector
Documents

Optional items

The order number for the transducer cable is included in case the cable fitted to the transducer is too short.


ProductOrder numberIn the box
Transducer cable 382189 Transducer cable

Documents

How to access the DWG files

Whenever available, each drawing is provided on both PDF and DWG formats. When applicable, the DWG version of the drawing is included in the PDF file as an attachment.

  1. Open the PDF file in the normal manner.
  2. Observe the "Attachment" icon in the lower left corner.
  3. Click the icon to open the list of attachments.
  4. Click on the DWG file provided, and select required action on the menu above the list.

  1. Attachement icon
  2. Menu: Open or save the attachment file

The following 38 kHz transducers are available.

Single beam transducers

Split-beam transducers

Dual frequency single beam transducers

Dual frequency split beam transducers

Documents

Echo sounders

 
Copyright ©2018 Kongsberg Maritime AS - All rights reserved. Terms of use | Contact information | Website feedback